Grave Cover was created to replace the standard ledger or slab that is normally fitted atop a gravesite. The design of this unit is easy to personalize and will add a look of distinction to any plot. With attractive choices that are simple to maintain, this cover can be placed in any cemetery.
Standard grave covers, ledgers or slabs simply lie atop the ground. Grave Cover is a more attractively designed aboveground monument resembling a tomb that also offers a means for personalization. The lighter weight unit will prove more cost effective and will outlast other products as this sturdy design is partially fitted beneath the ground.
Grave Cover is an attractive and decorative covering for a grave specially designed so that 12-inches will actually sit beneath the ground. The solid acrylic capped ABS plastic molded cover measuring about 6’ long by 1’ or 2’ high by 3’ wide and is simply set atop the desired area and the specified portion is then buried. This lightweight cover is also securely held into place with a six-inch wide tab extending outward around the base. With this portion also covered with dirt and earth, the cover will remain in place even during questionable weather conditions. This design can be produced to resemble marble or granite and can be engraved or adorned with plaques or other sentimental ornaments. The weather resistant material could be fashioned in various styles, colors, designs, and with angles, corners, and additions as determined by the manufacturer or consumer.
Grave Cover is shown in a variety of designs and colors. A portion of the entire Grave Cover unit will rest below ground for additional security in placement. The unit can be adorned with additional ornaments or plaques if desired. Grave Cover is an attractive addition to a gravesite.
With a lot of public cemeteries not allowing anything above ground level, the smaller grave cover is designed to be buried in the ground with only the top of the unit showing. This allowing for mowing or grounds keeping without any trouble. This design would allow people who have until this point only been able to put a simple marker upon the grave more freedom to memorialize their loved one. Also this design allows people who already have a headstone more room for a detailed epitaph.
Standard grave covers, ledgers or slabs simply lie atop the ground. Grave Cover is a more attractively designed aboveground monument resembling a tomb that also offers a means for personalization. The lighter weight unit will prove more cost effective and will outlast other products as this sturdy design is partially fitted beneath the ground.
Grave Cover is an attractive and decorative covering for a grave specially designed so that 12-
Grave Cover is shown in a variety of designs and colors. A portion of the entire Grave Cover unit will rest below ground for additional security in placement. The unit can be adorned with additional ornaments or plaques if desired. Grave Cover is an attractive addition to a gravesite.
With a lot of public cemeteries not allowing anything above ground level, the smaller grave cover is designed to be buried in the ground with only the top of the unit showing. This allowing for mowing or grounds keeping without any trouble. This design would allow people who have until this point only been able to put a simple marker upon the grave more freedom to memorialize their loved one. Also this design allows people who already have a headstone more room for a detailed epitaph.
To God Be The Glory